Taglierina HV

The HV Slopehelper’s cutter featuring tried and tested technology for the most demanding long-term use.

Sh HV cutter

 The horizontal/vertical cutter Type of an orchard and vine trimmer can boast of being the only type of pruning machine that detects branches growing in a row and upward with the help of a side radar.

The triangular cutting units, with 3mm thickness and sharpened peaks together with a combination of three actuators, it can automatically change the angle of action and maintain the required distance from the tree line.

The HV vine trimmer has individually adjustable side cutting sections with protection from unwanted proximity to the fruit. The frame, with double inner tubes and a shaft frame attached to the base platform, is also ideally suited for autonomous use. It is equipped with collision protection on the rear, front and side as well as additional stabilization of the cutting unit.

This pruning hinged equipment of SH system machines are ideal to perform a summer pruning of young bunches of chandeliers. We have a pattern in the shape of a letter: L turned upside down.

A horizontal blade with a fixed axle, with full transmission through timeless-belts and fully electro-mechanical ensures the greatest stability and longest service life. Belt pulley with cover and no guide rollers or any oil and grease required, guarantee a significantly longer service lifetime.

Rotating blades on low speed on the top horizontal part, as well as the vertical 180 cm lateral side trimmer, guarantee seamlessly maintained rows in the vineyard and provides enough space for air circulation, preserves the strength of the plant in the fruit, not in the young branches.

Without the use of a height-adjusting control joystick, as well as a separate width adjustment and tilt of the cutting units, the HV Cutter adjusts automatically after the previously set proprietors on the board computer for the length and width of the rows.

Lawn mowing system

operating position

front

back

side

central

place of attach

front

-

-

-

-

rear

-

-

cargo platform

-

-

-

-

How to use it

 

Trimming machines HV is characterized by heavy-duty side shift on bearings, and better-performing inclination of vertical bars, which makes it suitable for use in on the hills. The HV cutter has the independent lift activators adjustment of cutting bars to perfectly match the needs of plants situated on the sloped sides.

The HV cutter just like the other products in the range of hinged equipment for the Slopehelper system, is characterized by simplicity of use. The cutter itself has a powerful brushless motor (https://48ugv.com/components/brushless-motor) which provides the continues controlled movement of the blades as it would constantly trimmed the walls in the vineyards. When connecting to the base platform, on the board computer there will be displayed settings options of the HV cutter. The operator can decide between, height, width of the rows, row change mode (every second or next row) and speed of movement.

The HV cutter storage is on a specially designed storage cradle. To get the cutter from it and attach it on the Slopehelper base platform require a mini-garage crane or forklift or to come with SH to the barn to hang directly on it. For further installation and adjustment, there is existing an optional moveable cradle, specially designed for all attachments which allows easily maneuver and connecting. However, the whole process of maneuvering with the hinged equipment is easy and simple, and the attachments will not be left on the ground in your garage or somewhere outside.

Once mounted HV cutter on the basic platform it turns into the most innovative wall trimmer on the market so far. After connect with two power sockets and plugs to the main system of the base platform on the board computer, will be shown a notification that lets you know the cutter is ready for work. By giving only a few commands the agro-system can complete pruning of the plantation at any time you decide whether it is too hot to work in the field or at night. The SH autonomous system will have done its job and will inform you of the achieved results.

Main advantages

 

  • Easy to attach

As well as all other plugs in the Slopehelper hinged equipment range also and the HV cutter has a fast connector for attaching to the base platform.

  • Low maintenance

Small amount of spare parts and transmission by electric actuators means less downtime and low operation costs.

  • Silent operation

Powered by a high power, low voltage brushless electric motors, which are the same in the base platform will experience very quiet moving, which allows it operating day and night without disturbing the surroundings and do not harm the health to all participants around the vehicle.

  • Automatic angle adjustment

Whether it is a terraced vineyard or in rows, flat or uphill, the HV trimmer can automatically change the operating angle, depending on the horizontal position of Slopehlper.

 

Specification:

 

  • Recommended speed                      3-7 km/h
  • Cutting length: Vertical blade         180 cm
  • Cutting length: Horizontal blade     80 cm
  • Min. passage width                        170 cm
  • Wide adjustment range                   160 cm - 250 cm
  • Weight                                            195 kg
  • Material                                         High-grade steel
  • Sound power level                         41 dB
  • Brushless motor                             BLDC
  • Low voltage                                   48 V